EcoBoost to BMW Transmission Adapter
This is a complete kit to adapt any Ford Ecoboost 2.3L or 2.0L engine to the ZF 5speed or 6speed BMW manual transmission.
Our kit is tested alongside Chelsea DeNofa and his fleet of Ecoboost swapped race cars.
This JEM-Sport Ecoboost-to-ZF adapter kit includes:
- Bell Housing Adapter
- Billet ZF5/ZF6 Flywheel
- Pilot Bearing
- Adapter-to-Engine Hardware
- Adapter-to-Transmission Hardware
-Recommended flywheel bolts: 8G9Z-00812-A (not provided)
Paired with our E36 or E46 engine mount kit, you can simply retain your factory transmission, trans mounts and driveshaft. This saves considerable cost compared to other swaps. In most cases, the EcoBoost engine you purchase will already have the turbo, intake and exhaust manifolds, wiring harness and ECU. Making for a fairly straight-forward swap!
Simply install our circlip-retained pilot bearing in the front face(clutch side) of the flywheel for the 5speed application, and in the rear face(engine side) for the 6 speed application.
Any single-mass clutch kit that you would normally purchase for your respective transmission will work with our flywheels. However, we do have some unique clutch kit solutions for various racing applications.
This kit places the Ecoboost engine on its natural 10deg angle, towards the exhaust side. This makes the EB engine a more compact package, and is how we have designed our BMW chassis-specific mount kits.
If you are looking for an adapter that will place the engine at 0-degrees, we offer that 5/6speed kit as well.
Our adapter plate is designed to work with the BMW ZF S5D-320Z 5 speed, BMW Getrag S5D-250G 5 speed, and BMW ZF GS6-37BZ 6 speed transmissions found in most any 6 cylinder BMW E36, E46, E90 and Z3.
We have added BMW DCT fitment to the adapter plate as well!
Our kit will also work with the 2.0L, 2.3L, and 2.5L Duratec and MZR engines.
If you are in need of a clutch as well, check out our new JEM-Sport Clutch Kit here.
Buy with confidence! If you have any issues for any reason at all, let us know! We want to help you complete your project. If it turns out you purchased something from us that you no longer need, simply send it back for a refund.