StandAlone ECU

Sale

JEM-Sport

JEM-Sport Ecoboost ECU / PCM Unlock PATS Removal

MSRP:

Was: $399.99

Now: $349.99
COBB

Cobb Ford Performance EcoBoost 2.3/2.0 ECU AccessPORT V3

MSRP:

Was:

Now: $675.00
Link

Link G4X XtremeX Standalone ECU

MSRP:

Was:

Now: $1,750.00
Link

Link G4X FuryX ECU

MSRP:

Was:

Now: $1,950.00
JEM-Sport

JEM-Sport IAT Air Temperature Sensor Kit, 3/8 NPT

MSRP:

Was:

Now: $49.00
Link

LINK G4X WRXLink v11

MSRP:

Was:

Now: $1,750.00
Link

Link Subaru EJ25 Plug And Play ECU WRXLink (V10) - WRX107X

MSRP:

Was:

Now: $1,750.00
Link

Link Subaru EJ25 Plug And Play ECU WRXLink (04) - WRX104X

MSRP:

Was:

Now: $1,750.00
AEM

AEM X-Series Inline Wideband UEGO AFR Controller

MSRP:

Was:

Now: $179.85
COBB

Cobb Ford Mustang EcoBoost AccessPORT V3 - AP3-FOR-003

MSRP:

Was:

Now: $625.00
Link

Link G4X StormX Standalone ECU

MSRP:

Was:

Now: $1,595.00
Link

LS Gen 3 to Gen 4 Cam Sensor Conversion Harness

MSRP:

Was:

Now: $40.00
Link

LS Gen 4 Knock Adapter Loom

MSRP:

Was:

Now: $60.00
Link

LS Gen 3 Knock Adapter Loom

MSRP:

Was:

Now: $25.00
Link

LS Map Adapter Harness

MSRP:

Was:

Now: $25.00
Link

G4X StormX ECU + Terminated LS Engine Harness Drive-by-Cable Bundle

MSRP:

Was:

Now: $2,749.00
Link

LS Stepper Adapter Harness

MSRP:

Was:

Now: $25.00
Link

G4X Xtreme ECU + Terminated LS Engine Harness Drive-by-Wire Bundle

MSRP:

Was:

Now: $2,899.00
Link

Terminated Engine Harness GM LS GEN3/4

MSRP:

Was:

Now: $990.00
Link

LS Drive By Wire Adapter Loom

MSRP:

Was:

Now: $45.00
SCT

SCT X4 Programmer

MSRP:

Was:

Now: $399.00
Haltech

Haltech Nexus R3 VCU

MSRP:

Was:

Now: $2,395.00
ECUMASTER

EMU PRO 8 Connectors

MSRP:

Was:

Now: $115.00
ECUMASTER

EMU PRO 16 Connectors

MSRP:

Was:

Now: $145.00
ECUMASTER

ECUMASTER EMU PRO 16

MSRP:

Was:

Now: $2,349.00
ECUMASTER

ECUMASTER EMU PRO 8

MSRP:

Was:

Now: $1,849.00
Link

Link G5 Voodoo Pro Standalone ECU

MSRP:

Was:

Now: $3,295.00
Link

Pressure Sensor (PS150)

MSRP:

Was:

Now: $205.00
JEM-Sport

JEM-Sport B-Connector and Pin Kit "B" Loom

MSRP:

Was:

Now: $39.99
JEM-Sport

JEM-Sport A-Connector and Pin Kit "A" Loom

MSRP:

Was:

Now: $39.99
JEM-Sport

2015+ WRX FA20DIT E-Tune

MSRP:

Was:

Now: $349.99
Haltech

Haltech WB1 Single Channel CAN O2 Wideband Controller Kit

MSRP:

Was:

Now: $329.00
Link

Combined Pressure and Temperature Sensor (CPTS)

MSRP:

Was:

Now: $165.00
Link

E-Throttle upgrade on G4X Plugin ECU

MSRP:

Was:

Now: $125.00
Haltech

Haltech Oil Temperature Sensor High Range

MSRP:

Was:

Now: $80.00
Haltech

Haltech Boost Control Solenoid 3 Port 1/8th NPT 33Hz

MSRP:

Was:

Now: $119.00

Sale

JEM-Sport

JEM-Sport Ecoboost ECU / PCM Unlock PATS Removal

Ecoboost ECU PATS Delete This is a service for removing PATS from your Ford PCM/ECU/ECM. Simply ship us your PCM and we will bench test and remove the PATS security system. Feel free to send us your PCM before purchasing if you'd like. This...

MSRP:

Was: $399.99

Now: $349.99
COBB

Cobb Ford Performance EcoBoost 2.3/2.0 ECU AccessPORT V3

Simple ECU flashing with gauge package! The new in-cabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel...

MSRP:

Was:

Now: $675.00
Link

Link G4X XtremeX Standalone ECU

The XtremeX is one of Link’s premium ECU’s with more inputs, outputs and features.The XtremeX has built in E-throttle and all the advanced features including Anti-lag, Cruise Control and Traction Control.With 8 Injector drives and 8...

MSRP:

Was:

Now: $1,750.00
Link

Link G4X FuryX ECU

G4X FuryX ECU A premium ECU with Onboard Digital Wideband. The FuryX is a premium ECU like the XtremeX, but with added Onboard Digital Wideband Lambda Control. Now on the G4X platform, the FuryX features a faster processor, faster communications...

MSRP:

Was:

Now: $1,950.00
JEM-Sport

JEM-Sport IAT Air Temperature Sensor Kit, 3/8 NPT

JEM-Sport IAT (Inlet Air Temperature) Sensor Kits are perfect for vehicles using any standalone ECU that are not equipped from the factory with an intake air temperature sensor or have removed the factory MAF and need an air temperature sensor to replace...

MSRP:

Was:

Now: $49.00
Link

LINK G4X WRXLink v11

Easy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a...

MSRP:

Was:

Now: $1,750.00
Link

Link Subaru EJ25 Plug And Play ECU WRXLink (V10) - WRX107X

Easy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a...

MSRP:

Was:

Now: $1,750.00
Link

Link Subaru EJ25 Plug And Play ECU WRXLink (04) - WRX104X

Easy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a...

MSRP:

Was:

Now: $1,750.00
AEM

AEM X-Series Inline Wideband UEGO AFR Controller

This product will work with any standalone ECU. It can be used as a direct replacement for the MoTeC LTC and works seamlessly. AEM’s X-Series Inline Wideband UEGO Air/Fuel Ratio Controllers are built upon unique, patented, 100%...

MSRP:

Was:

Now: $179.85
COBB

Cobb Ford Mustang EcoBoost AccessPORT V3 - AP3-FOR-003

Click HERE to check out our Mustang Drift Tune while you're at it! Description Simple ECU flashing with gauge package! The new in-cabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to...

MSRP:

Was:

Now: $625.00
Link

Link G4X StormX Standalone ECU

If it is value for money you are after, the StormX is the ECU for you. The StormX offers most of the advanced G4X tuning features, at an extremely competitive price. The Link G4X StormX ECU is the latest version of our trusty, mid-sized ECU. With...

MSRP:

Was:

Now: $1,595.00
Link

LS Gen 3 to Gen 4 Cam Sensor Conversion Harness

Adapter harness to run the Gen 4 front mounted under water pump Cam Sensor on the Gen 3 LS Engine.

MSRP:

Was:

Now: $40.00
Link

LS Gen 4 Knock Adapter Loom

Intended for use with Link ECU terminated LS engine harness. Plug and play compatibility with Gen 4 Knock Sensors in factory location.

MSRP:

Was:

Now: $60.00
Link

LS Gen 3 Knock Adapter Loom

• Intended for use with Link ECU terminated LS engine harness. Plug and play compatibility with factory Gen 3 Knock Sensor loom (located in the valley).

MSRP:

Was:

Now: $25.00
Link

LS Map Adapter Harness

• Intended for use with Link ECU terminated LS engine harness. Plug and play compatibility for Gen 3 LS map sensors

MSRP:

Was:

Now: $25.00
Link

G4X StormX ECU + Terminated LS Engine Harness Drive-by-Cable Bundle

The quickest, easiest, tidiest and most cost effective way to connect a Link ECU to your Drive-by-Cable LS V8 engine. Bundle Includes: G4X StormX ECU (8 x Injector and 8 x Ignition Drives) Terminated Engine Harness GM LS GEN3/4* LS Stepper...

MSRP:

Was:

Now: $2,749.00
Link

LS Stepper Adapter Harness

• Intended for use with Link ECU terminated LS engine harness. Plug and play compatibility with GM LS IAC stepper motors. If you are planning to run a drive by cable configuration on our terminated LS harness you will need this part.• This...

MSRP:

Was:

Now: $25.00
Link

G4X Xtreme ECU + Terminated LS Engine Harness Drive-by-Wire Bundle

The quickest, easiest, tidiest and most cost effective way to connect a Link ECU to your Drive-by-Wire LS V8 engine. Bundle Includes: G4X XtremeX ECU (8 x Injector, 8 x Ignition Drives) Terminated Engine Harness GM LS GEN3/4 LS Drive-by-Wire Adapter...

MSRP:

Was:

Now: $2,899.00
Link

Terminated Engine Harness GM LS GEN3/4

Terminated Engine Harness to cover a wide range of GM LS Engine Variations. Please note that due to the large number of Engines supported it may require user modification for some applications, see Installation Manual or Contact Links Tech Support team...

MSRP:

Was:

Now: $990.00
Link

LS Drive By Wire Adapter Loom

• Intended for use with Link ECU terminated LS engine harness. Plug and play compatibility for Gen 4 LS DBW throttle bodies. • This adapter loom terminates to Aux 9/10, 5v reference, sensor ground, AN5, and AN6 via the pre-wired DBW connector...

MSRP:

Was:

Now: $45.00
SCT

SCT X4 Programmer

The X4 Performance Programmer connects high-performance tunes to your vehicle for a boost in horsepower & torque. Awaken your engine to its real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Modify a variety...

MSRP:

Was:

Now: $399.00
Haltech

Haltech Nexus R3 VCU

Nexus R3 VCU Much like its bigger brother, the new Nexus R3 combines the functionality of a power distribution module, a data logger, a wideband controller and a state-of-the-art engine management system in one compact yet powerful device. With a small...

MSRP:

Was:

Now: $2,395.00
ECUMASTER

EMU PRO 8 Connectors

EMU Pro 8 Connector kit includes 2x 34 position and 1x 26 position Super Seal connectors with 94 gold plated terminals.

MSRP:

Was:

Now: $115.00
ECUMASTER

EMU PRO 16 Connectors

EMU Pro 16 Connector kit includes 2x 34 position and 2x 26 position Super Seal connectors with 120 gold plated terminals.

MSRP:

Was:

Now: $145.00
ECUMASTER

ECUMASTER EMU PRO 16

The EMU PRO is a stand-alone engine management system aimed at bringing a comprehensive professional motorsport feature set and vast tuning possibilities to both professionals and the DIY market. It offers precise powertrain control coupled with the...

MSRP:

Was:

Now: $2,349.00
ECUMASTER

ECUMASTER EMU PRO 8

The EMU PRO is a stand-alone engine management system aimed at bringing a comprehensive professional motorsport feature set and vast tuning possibilities to both professionals and the DIY market. It offers precise powertrain control coupled with the...

MSRP:

Was:

Now: $1,849.00
Link

Link G5 Voodoo Pro Standalone ECU

New G5 Voodoo Pro G5 Voodoo Pro puts real magic in your hands and opens a new world of possibilities with the ability to control port plus direct injection, more injector and ignition drives, advanced communications and many more features. With...

MSRP:

Was:

Now: $3,295.00
Link

Pressure Sensor (PS150)

Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Technical Specs and WiringUp to 150 PSI above atmospheric pressure, cannot be used to read vacuum0.5v = 0bar / 0PsiG4.5v = 10 Bar / 145.03PsiG

MSRP:

Was:

Now: $205.00
JEM-Sport

JEM-Sport B-Connector and Pin Kit "B" Loom

Do you want to pin your own wiring harness into your new Link Standalone ECU? Here is the connector and terminal pin kit for the Link B Loom connection. You may also be interested in our A Loom connector kit, HERE.

MSRP:

Was:

Now: $39.99
JEM-Sport

JEM-Sport A-Connector and Pin Kit "A" Loom

Do you want to pin your own wiring harness into your new Link Standalone ECU? Here is the connector and terminal pin kit for the Link A Loom connection. You may also be interested in our B Loom connector kit, HERE.

MSRP:

Was:

Now: $39.99
JEM-Sport

2015+ WRX FA20DIT E-Tune

Select this product listing only when you need an E-Tune for your 2015+ WRX with a Cobb Accesport. We will email you and get the process started! In most cases, we can wrap up your Etune within 2-4 revisions. ETune for any 2015+ WRX COBB...

MSRP:

Was:

Now: $349.99
Haltech

Haltech WB1 Single Channel CAN O2 Wideband Controller Kit

Suits: Bosch LSU 4.9 Sensor Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4'/1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. Notes: The ideal CAN expansion accessory for all Elite Series ECUs.

MSRP:

Was:

Now: $329.00
Link

Combined Pressure and Temperature Sensor (CPTS)

Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitable for Oil, Coolant, Fuel, Transmission fluid etc. Up to 10.0 bar (145PSI/1000kpa) Pressure Sensor for Liquid -40 to 140°C...

MSRP:

Was:

Now: $165.00
Link

E-Throttle upgrade on G4X Plugin ECU

Requires modification to be done by Global HQ at time of order (allow approx 2 weeks in addition to standard lead time).E-Throttle upgrade can be done on the below G4X Plugins:BMW E36X - 201-4000Honda HC92X - 205-4000Honda HC96X - 206-4000Mazda MX5X -...

MSRP:

Was:

Now: $125.00
Haltech

Haltech Oil Temperature Sensor High Range

Haltech Oil Temperature Sensor High Range 150 Deg C 1/8 NPT Thread (Incl Bosch EV1 Plug & Pins)

MSRP:

Was:

Now: $80.00
Haltech

Haltech Boost Control Solenoid 3 Port 1/8th NPT 33Hz

Haltech Boost Control Solenoid 3 Port 1/8th NPT 33Hz

MSRP:

Was:

Now: $119.00