JEM-Sport JEM-Sport IAT Air Temperature Sensor Kit, 3/8 NPT JEM-Sport IAT (Inlet Air Temperature) Sensor Kits are perfect for vehicles using any standalone ECU that are not equipped from the factory with an intake air temperature sensor or have removed the... MSRP: Was: Now: $79.00
JEM-Sport DTM12 DTM6 Expansion Connectors and Pins DTM12 and DTM6 Female Expansion Connectors and W-crimp Pins for use with our JEM-Sport Link ECU Ecoboost Swap harnesses. MSRP: Was: Now: $28.00
Link Link ECU Hall Effect Sensor Kit Hall effect sensor designed for use in applications where ferrousedge detection/near-zero speed sensing is needed. They provide a sinking current output. Typical automotive applications... MSRP: Was: Now: $90.00
Link Link Crank Angle Sensor (CAS) Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigger wheel, see related products for our trigger wheel... MSRP: Was: Now: $160.00
Link CANTEE - Link CAN Splitter Cable CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices. Specs DTM4 Female to 2 x DTM4 Male. Includes CAN and Power Wiring... MSRP: Was: Now: $55.00
Link Link CANJST4 - CAN Expansion Connection Cable for Plugin ECU's (4pin) Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older 5pin CAN connector). Plugs directly into the socket on... MSRP: Was: Now: $49.50
Link Link CANJST - CAN Expansion Connection Cable for Plugin ECU's (5pin) Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector. Plugs directly into the CAN socket on the ECU PCB. 12V and Ground via flying lead. Terminates to a DTM4 Male... MSRP: Was: Now: $47.00
Link CANEXT - CAN Extension Cable 2m 2 meter CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN device/s. Specs MSRP: Was: Now: $55.00
Link Link TCC04 4 Channel EGT to CAN Module Link TCC04 4 Channel EGT to CAN module, powered by CANchecked The TCC04 EGT to CAN module allows you to connect up to four Type-K thermocouples and send the values via CAN bus and/or monitor them... MSRP: Was: Now: $280.00
Link Link TCC08 8 Channel EGT to CAN Module Link TCC08 8 Channel EGT to CAN module, powered by CANcheckedThe TCC08 EGT to CAN module allows you to connect up to eight Type-K thermocouples and send the values via CAN bus and/or monitor them... MSRP: Was: Now: $335.00
Link MIPS 150PSI Pressure Sensor 1/8 NPT Media Isolated 150PSI/10 Bar Pressure Sensor, 1/8 NPT The MIPS 150PSI/10 Bar Pressure Sensor features a durable stainless steel construction and is designed for compatibility with various fluids,... MSRP: Was: Now: $147.00
Link Link Ethanol Content Sensor Kit (ECS) Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle. This sensor also measures fuel... MSRP: Was: Now: $278.00
JEM-Sport JEM-Sport E-Connector and Pin Kit "E" Loom Do you want to pin your own wiring harness into your new Link Standalone ECU? Here is the connector and terminal pin kit for the Link E Loom connection. You may also be interested in our B Loom... MSRP: Was: Now: $39.99
JEM-Sport JEM-Sport B-Connector and Pin Kit "B" Loom Do you want to pin your own wiring harness into your new Link Standalone ECU? Here is the connector and terminal pin kit for the Link B Loom connection. You may also be interested in our A Loom... MSRP: Was: Now: $39.99
JEM-Sport JEM-Sport A-Connector and Pin Kit "A" Loom Do you want to pin your own wiring harness into your new Link Standalone ECU? Here is the connector and terminal pin kit for the Link A Loom connection. You may also be interested in our B Loom... MSRP: Was: Now: $39.99
Link Link Combined Pressure and Temperature Sensor (CPTS) Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitable for Diesel, gasoline, E85, engine oil, transmission oil Up to 10.0... MSRP: Was: Now: $190.00
AEM AEM 320LPH Fuel Pump Kit w/o Mounting Hooks - Ethanol Compatible AEM 320LPH 65mm Fuel Pump Kit w/o Mounting Hooks - Ethanol Compatible A version with mounting hooks, PN: 50-1215, can be found HERE. A slightly longer version, PN: 50-1200, can be found MSRP: Was: Now: $155.95
AEM AEM 340LPH Fuel Pump Kit w/ Mounting Hooks - Ethanol Compatible AEM 340LPH 65mm Fuel Pump Kit w/ Mounting Hooks - Ethanol Compatible A version of the pump WITHOUT mounting hooks, PN: 50-1220 can be found HERE. This version is slightly shorter than the 50-1200... MSRP: Was: Now: $145.95
AEM AEM 340LPH In Tank Fuel Pump Kit - Ethanol Compatible AEM 340LPH In Tank Fuel Pump Kit - Ethanol Compatible A slightly shorter version with mounting hooks, PN: 50-1215, can be found HERE. A slightly shorter version WITHOUT mounting hooks, PN: 50-1220,... MSRP: Was: Now: $145.95
Link Air Temp Sensor 1/8th NPT IAT Available with Aluminum or Steel bungs / Mounting bosses. Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread MSRP: Was: Now: $90.00 - $114.00
AEM AEM Replacement Wideband Sensor Bosch LSU 4.9 UEGO AEM Bosch LSU 4.9 Wideband UEGO "Replacement" Sensor for Part Numbers 30-0300, 30-0334, 30-0310, 30-0350, 30-4110 & 30-4110NS AEM's Bosch 4.9LSU Wideband UEGO O2 replacement sensor kit... MSRP: Was: Now: $155.00
AEM AEM X-Series Wideband Gauge UEGO AFR Sensor Controller AEM’s X-Series Wideband UEGO Air/Fuel Ratio Sensor Controller Gauges are built upon unique, patented 100% Digital technology (Patent 9,575,030) that makes them the fastest responding wideband... MSRP: Was: Now: $229.99
AEM AEM Coil IGN1A Includes connector and pins! The tradeoff between adequate spark energy and adequate spark duration ends with AEM’s High-Output Inductive Coils, the first inductive coils that deliver CDI-like spark... MSRP: Was: Now: $89.99
AEM AEM X-Series OBDII Wideband UEGO AFR Sensor Controller Gauge AEM's X-Series OBDII Wideband UEGO AFR Sensor Controller Gauge (PN 30-0334) provides tuners who are using piggyback tuning modules or open source software with the ability to view AFR through the... MSRP: Was: Now: $299.00
Link Link Three Channel Inductive Igniter -I3 This three channel igniter is suitable for electronic ignition applications. Required when using coils that don't have inbuilt igniters.Common uses include: wasted spark on 6 cylinder engines,... MSRP: Was: Now: $185.00
Link E-throttle G4 - #G4RET Link's new G4+ external E-throttle (Drive by Wire) module works with Link's G4+ Storm, Kurofune and PlugIN ECUs to give you full control of your throttle setup, allowing a faster more precise... MSRP: Was: Now: $365.00
Link E-Throttle Accelerator Pedal Module E-Throttle Accelerator Pedal Module Firewall mounted hanging design 16degree (~70mm) travel Redundant dual output potentiometers suitable for use with Electronic throttle bodies Includes 6 pin... MSRP: Was: Now: $215.00
Link Electronic Throttle Body Kit - 82mm 82mm Electronic Throttle Body 82mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit MSRP: Was: Now: $285.00
Link Electronic Throttle Body Kit - 54mm 54mm Electronic Throttle Body 54mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit MSRP: Was: Now: $285.00
Link Boost Control Solenoid - 3 Port More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of boost control applications, they allow for precise... MSRP: Was: Now: $150.00
Link Boost Control Solenoid - 4 Port Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.4 port Boost control soldenoids are commonly used for... MSRP: Was: Now: $175.00
Link Wideband O2 sensor (LSU49) This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes: Link G4+/G4X Fury and G4+Thunder ECU’s – These have on-board LSU4.9 wide-band... MSRP: Was: Now: $140.00
Link Link CAN Lambda Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs. If using the CAN Lambda with a G4+/G4X... MSRP: Was: Now: $415.00
Link O2 Bung & Plug Used to install LSU 4.9 Wideband O2 sensor. Includes weld on bung and plug. MSRP: Was: Now: $24.00
Link Link Exhaust Gas Temperature Probe Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel protected... MSRP: Was: Now: $145.00
Link 5 Bar MAP Sensor (MAP5EU) The 5 Bar MAP Variohm Eurosensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 4 Bar (or 58psi) of boost pressure. Includes... MSRP: Was: Now: $245.00
