Link ECU

JEM-Sport

JEM-Sport ZN6 EcoBoost Swap Wiring Harness - Link GT86 ECU

MSRP:

Was:

Now: $1,299.99
Link

Link WRXLink V11 - WRX11X USDM

MSRP:

Was:

Now: $1,845.00
JEM-Sport

Link ECU Remote Tuning / E-Tune

MSRP:

Was:

Now: $489.99
Link

Link G4X XtremeX Standalone ECU

MSRP:

Was:

Now: $1,845.00
Link

Link G4X FuryX ECU

MSRP:

Was:

Now: $2,045.00
Link

G5 ECU Plug-In - Toyota GT86/Subaru BRZ/Scion FR-S

MSRP:

Was:

Now: $1,945.00
JEM-Sport

JEM-Sport IAT Air Temperature Sensor Kit, 3/8 NPT

MSRP:

Was:

Now: $49.00
Link

LINK G4X WRXLink v11

MSRP:

Was:

Now: $1,845.00
Link

Link Subaru EJ25 Plug And Play ECU WRXLink (V10) - WRX107X

MSRP:

Was:

Now: $1,845.00
Link

Link Subaru EJ25 Plug And Play ECU WRXLink (04) - WRX104X

MSRP:

Was:

Now: $1,845.00
Link

Link G4X StormX Standalone ECU

MSRP:

Was:

Now: $1,675.00
Link

MIPS 150PSI Pressure Sensor 1/8 NPT

MSRP:

Was:

Now: $120.00
Link

Razor PDM Bundle - Razor PDM + 12 Button CAN Keypad

MSRP:

Was:

Now: $1,220.00
Link

Razor PDM Bundle - Triple Pack

MSRP:

Was:

Now: $2,500.00
Link

Razor PDM Bundle - Twin Pack

MSRP:

Was:

Now: $1,740.00
Link

Link Ethanol Content Sensor Kit (ECS)

MSRP:

Was:

Now: $240.00
Link

Link DI Driver-4

MSRP:

Was:

Now: $749.00
JEM-Sport

JEM-Sport E-Connector and Pin Kit "E" Loom

MSRP:

Was:

Now: $39.99
Link

10m 4 Core CAN Wiring

MSRP:

Was:

Now: $42.00
Link

Automotive Wire Pack 50m (4 Colors)

MSRP:

Was:

Now: $47.00
Link

Link CAN Keypad 15 Button + 2 Rotary Encoders

MSRP:

Was:

Now: $599.00
Link

Link RACEPAD - Steering Wheel CAN Keypad

MSRP:

Was:

Now: $999.00
Link

LINK MXT Strada 10" Dash - Race Edition

MSRP:

Was:

Now: $1,799.00
Link

LINK MXT Strada 10" Dash - Street Edition

MSRP:

Was:

Now: $1,799.00
Link

LS Gen 3 to Gen 4 Cam Sensor Conversion Harness

MSRP:

Was:

Now: $40.00
Link

LS Gen 4 Knock Adapter Loom

MSRP:

Was:

Now: $60.00
Link

LS Gen 3 Knock Adapter Loom

MSRP:

Was:

Now: $25.00
Link

LS Map Adapter Harness

MSRP:

Was:

Now: $25.00
Link

G4X StormX ECU + Terminated LS Engine Harness Drive-by-Cable Bundle

MSRP:

Was:

Now: $2,499.00
Link

LS Stepper Adapter Harness

MSRP:

Was:

Now: $25.00
Link

G4X Xtreme ECU + Terminated LS Engine Harness Drive-by-Wire Bundle

MSRP:

Was:

Now: $2,649.00
Link

Terminated Engine Harness GM LS GEN3/4

MSRP:

Was:

Now: $990.00
Link

LS Drive By Wire Adapter Loom

MSRP:

Was:

Now: $45.00
Link

Link G5 Voodoo Pro Standalone ECU

MSRP:

Was:

Now: $3,295.00
Link

Pressure Sensor (PS150)

MSRP:

Was:

Now: $205.00
JEM-Sport

JEM-Sport B-Connector and Pin Kit "B" Loom

MSRP:

Was:

Now: $39.99

JEM-Sport

JEM-Sport ZN6 EcoBoost Swap Wiring Harness - Link GT86 ECU

Ecoboost swap engine harness for ZN6 BRZ GT86 FRS Our harness will replace the factory ZN6 engine harness, allowing you to leave all of your other factory wiring in place. This kit includes a complete engine wiring harness neccessary for the Ford 2...

MSRP:

Was:

Now: $1,299.99
Link

Link WRXLink V11 - WRX11X USDM

Easy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with...

MSRP:

Was:

Now: $1,845.00
JEM-Sport

Link ECU Remote Tuning / E-Tune

Remote tuning service for Link ECUs This cost will cover the time neccessary to complete an Etune on your Link ECU equipt project. If you would like to speed the process up, please provide a copy of your current tune/calibration file and an...

MSRP:

Was:

Now: $489.99
Link

Link G4X XtremeX Standalone ECU

The XtremeX is one of Link’s premium ECU’s with more inputs, outputs and features.The XtremeX has built in E-throttle and all the advanced features including Anti-lag, Cruise Control and Traction Control.With 8 Injector drives and 8...

MSRP:

Was:

Now: $1,845.00
Link

Link G4X FuryX ECU

G4X FuryX ECU A premium ECU with Onboard Digital Wideband. The FuryX is a premium ECU like the XtremeX, but with added Onboard Digital Wideband Lambda Control. Now on the G4X platform, the FuryX features a faster processor, faster communications...

MSRP:

Was:

Now: $2,045.00
Link

G5 ECU Plug-In - Toyota GT86/Subaru BRZ/Scion FR-S

The GT86 G5 Plug-in is a standalone plug and play replacement for the factory ECU and plugs straight into the original wiring loom, no adapter harness needed and comes with a sample map for a tuning head start. The GT86 G5 Plug-in runs the same powerful...

MSRP:

Was:

Now: $1,945.00
JEM-Sport

JEM-Sport IAT Air Temperature Sensor Kit, 3/8 NPT

JEM-Sport IAT (Inlet Air Temperature) Sensor Kits are perfect for vehicles using any standalone ECU that are not equipped from the factory with an intake air temperature sensor or have removed the factory MAF and need an air temperature sensor to replace...

MSRP:

Was:

Now: $49.00
Link

LINK G4X WRXLink v11

Easy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a...

MSRP:

Was:

Now: $1,845.00
Link

Link Subaru EJ25 Plug And Play ECU WRXLink (V10) - WRX107X

Easy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a...

MSRP:

Was:

Now: $1,845.00
Link

Link Subaru EJ25 Plug And Play ECU WRXLink (04) - WRX104X

Easy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a...

MSRP:

Was:

Now: $1,845.00
Link

Link G4X StormX Standalone ECU

If it is value for money you are after, the StormX is the ECU for you. The StormX offers most of the advanced G4X tuning features, at an extremely competitive price. The Link G4X StormX ECU is the latest version of our trusty, mid-sized ECU. With...

MSRP:

Was:

Now: $1,675.00
Link

MIPS 150PSI Pressure Sensor 1/8 NPT

Media Isolated 150PSI/10 Bar Pressure Sensor, 1/8 NPT The MIPS 150PSI/10 Bar Pressure Sensor features a durable stainless steel construction and is designed for compatibility with various fluids, including oil, petrol, and water.

MSRP:

Was:

Now: $120.00
Link

Razor PDM Bundle - Razor PDM + 12 Button CAN Keypad

Bundle - Includes 1 x Razor PDM and 1 x 12 Button CAN Keypad. Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you in complete control of your setup. The Razor...

MSRP:

Was:

Now: $1,220.00
Link

Razor PDM Bundle - Triple Pack

Triple Bundle - Includes 3 x Razor PDMs. Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you in complete control of your setup.The Razor PDM is a programmable...

MSRP:

Was:

Now: $2,500.00
Link

Razor PDM Bundle - Twin Pack

Bundle - Includes 2 x Razor PDMs. Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you in complete control of your setup.The Razor PDM is a programmable device...

MSRP:

Was:

Now: $1,740.00
Link

Link Ethanol Content Sensor Kit (ECS)

Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle. This sensor also measures fuel temperature. Compatible with all current Link Wire-In and...

MSRP:

Was:

Now: $240.00
Link

Link DI Driver-4

Discover the next evolution in engine tuning with our advanced Direct Injection (DI) control module. The DI Driver-4 is a highly configurable, cost effective and integrated solution, designed to give you full control of most modern solenoid type direct...

MSRP:

Was:

Now: $749.00
JEM-Sport

JEM-Sport E-Connector and Pin Kit "E" Loom

Do you want to pin your own wiring harness into your new Link Standalone ECU? Here is the connector and terminal pin kit for the Link E Loom connection. You may also be interested in our B Loom connector kit, HERE.

MSRP:

Was:

Now: $39.99
Link

10m 4 Core CAN Wiring

10m 4 Core CAN Wiring. Useful for wiring in CAN Accessories. Four internal wires (White, Green, Red, Black) in a PVC outer jacket. Internal Wire Spec: FLRRY 0.5mm² (20 AWG) Outer Jacket Sepc: PVC, OD 6.1mm

MSRP:

Was:

Now: $42.00
Link

Automotive Wire Pack 50m (4 Colors)

Details 50m pack of Automotive Wire (4 colours). 20m x Red10m x Black10m x Red/Green10m x Green Wire Spec: AVSS Thinwall 0.5mm² (20 AWG)

MSRP:

Was:

Now: $47.00
Link

Link CAN Keypad 15 Button + 2 Rotary Encoders

Rugged 15 button CAN Keypad with interchangeable 15mm inserts (sold separately). Two rotary encoders with 16 Blue indicator LEDs each. Four additional analog inputs allow additional sensors/switches to directly connect to the CAN Bus network through the...

MSRP:

Was:

Now: $599.00
Link

Link RACEPAD - Steering Wheel CAN Keypad

RacePad is the ultimate CAN-bus steering wheel button panel designed to elevate your racing experience to the next level. With 4 rotary knobs and 8 easy-to-reach buttons, RacePad is the ideal addition to any race car, enabling both professional drivers...

MSRP:

Was:

Now: $999.00
Link

LINK MXT Strada 10" Dash - Race Edition

Link MXT Strada 10” dash, powered by AIM. The Link MXT Strada Race edition is a full colour, 10-inch dash display with 10 RGB shift lights and six customisable alarm LED lights. It is pre-configured to work with all Link G4+/G4X/G5 Wire-In and...

MSRP:

Was:

Now: $1,799.00
Link

LINK MXT Strada 10" Dash - Street Edition

Link MXT Strada 10” dash, powered by AIM. The Link MXT Strada Street edition is a full colour, 10-inch dash display legal for road use featuring 10 RGB shift lights and street icons above the dash. It is pre-configured to work with all Link...

MSRP:

Was:

Now: $1,799.00
Link

LS Gen 3 to Gen 4 Cam Sensor Conversion Harness

Adapter harness to run the Gen 4 front mounted under water pump Cam Sensor on the Gen 3 LS Engine.

MSRP:

Was:

Now: $40.00
Link

LS Gen 4 Knock Adapter Loom

Intended for use with Link ECU terminated LS engine harness. Plug and play compatibility with Gen 4 Knock Sensors in factory location.

MSRP:

Was:

Now: $60.00
Link

LS Gen 3 Knock Adapter Loom

• Intended for use with Link ECU terminated LS engine harness. Plug and play compatibility with factory Gen 3 Knock Sensor loom (located in the valley).

MSRP:

Was:

Now: $25.00
Link

LS Map Adapter Harness

• Intended for use with Link ECU terminated LS engine harness. Plug and play compatibility for Gen 3 LS map sensors

MSRP:

Was:

Now: $25.00
Link

G4X StormX ECU + Terminated LS Engine Harness Drive-by-Cable Bundle

The quickest, easiest, tidiest and most cost effective way to connect a Link ECU to your Drive-by-Cable LS V8 engine. Bundle Includes: G4X StormX ECU (8 x Injector and 8 x Ignition Drives) Terminated Engine Harness GM LS GEN3/4* LS Stepper...

MSRP:

Was:

Now: $2,499.00
Link

LS Stepper Adapter Harness

• Intended for use with Link ECU terminated LS engine harness. Plug and play compatibility with GM LS IAC stepper motors. If you are planning to run a drive by cable configuration on our terminated LS harness you will need this part.• This...

MSRP:

Was:

Now: $25.00
Link

G4X Xtreme ECU + Terminated LS Engine Harness Drive-by-Wire Bundle

The quickest, easiest, tidiest and most cost effective way to connect a Link ECU to your Drive-by-Wire LS V8 engine. Bundle Includes: G4X XtremeX ECU (8 x Injector, 8 x Ignition Drives) Terminated Engine Harness GM LS GEN3/4 LS Drive-by-Wire Adapter...

MSRP:

Was:

Now: $2,649.00
Link

Terminated Engine Harness GM LS GEN3/4

Terminated Engine Harness to cover a wide range of GM LS Engine Variations. Please note that due to the large number of Engines supported it may require user modification for some applications, see Installation Manual or Contact Links Tech Support team...

MSRP:

Was:

Now: $990.00
Link

LS Drive By Wire Adapter Loom

• Intended for use with Link ECU terminated LS engine harness. Plug and play compatibility for Gen 4 LS DBW throttle bodies. • This adapter loom terminates to Aux 9/10, 5v reference, sensor ground, AN5, and AN6 via the pre-wired DBW connector...

MSRP:

Was:

Now: $45.00
Link

Link G5 Voodoo Pro Standalone ECU

New G5 Voodoo Pro G5 Voodoo Pro puts real magic in your hands and opens a new world of possibilities with the ability to control port plus direct injection, more injector and ignition drives, advanced communications and many more features. With...

MSRP:

Was:

Now: $3,295.00
Link

Pressure Sensor (PS150)

Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Technical Specs and WiringUp to 150 PSI above atmospheric pressure, cannot be used to read vacuum0.5v = 0bar / 0PsiG4.5v = 10 Bar / 145.03PsiG

MSRP:

Was:

Now: $205.00
JEM-Sport

JEM-Sport B-Connector and Pin Kit "B" Loom

Do you want to pin your own wiring harness into your new Link Standalone ECU? Here is the connector and terminal pin kit for the Link B Loom connection. You may also be interested in our A Loom connector kit, HERE.

MSRP:

Was:

Now: $39.99