If it is value for money you are after, the StormX is the ECU for you. The StormX offers most of the advanced G4X tuning features, at an extremely competitive price.
The Link G4X StormX ECU is the latest version of our trusty, mid-sized ECU. With eight injector and eight ignition drives, it allows sequential injection and direct spark on engines with up to eight cylinders or four rotors.
If it is Traction control, e-throttle or Peak and Hold injection you are after, consider an Xtreme or Fury.
SPEC OVERVIEW:
Inputs
- 8 x Digital inputs
- 3 x temperature inputs
- 8 x Analog inputs
- 2 x Trigger Inputs
- 2 x Knock Inputs
Outputs
- 8 x Injection drives
- 8 x Ignition drivers
- 8 x Auxiliary outputs*
- +5V Sensor power supply
- +8V Sensor power supply
*unused fuel and ignition drives can be used as additional auxiliary outputs.
Communications
- 1 x CAN bus
- 1x USB tuning connection
Physical
Dimensions: 185mm(L) x 130mm(W) x 40mm(H) (without looms)
Mass: 660 grams
Advanced features not found on the AtomX or MonsoonX
Built in trigger oscilloscope.
Onboard Knock Control – support for two knock sensors wired directly to the ECU. No external amplifier required.
Boost control can be open or closed loop with up to three switchable tables.
Idle valve solenoid or stepper motor control.
Rotary oil metering pump control.
Most Motorsport features including full gear shift control, antilag and launch control
Up to 4 fully variable closed loop VVT cams. (up from 2)
What’s in the box
Supplied with USB tuning cable and mounting bracket.
Requires “A” & “B” looms or “A” & “B” connector kits.
All Link ECUs (Engine Control Units) are 100% New Zealand designed and developed. We also offer a limited lifetime warranty so if your ECU breaks in the normal course of its designed use then we’ll repair or replace, no questions asked.
