null

free shipping on orders over $150

36 of 55 Items
  • Link Subaru Plug And Play ECU WRXLink (V10) - WRX107X Link Subaru Plug And Play ECU WRXLink (V10) - WRX107X

    Link

    Link Subaru EJ25 Plug And Play ECU WRXLink (V10) - WRX107X

    Easy to install. Affordable. Reliable.  G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  This ECU fits inside the factory OEM enclosure. Installation is a...

    $1,595.00
  • Link Subaru Plug And Play ECU WRXLink (04) - WRX104X Link Subaru Plug And Play ECU WRXLink (04) - WRX104X

    Link

    Link Subaru EJ25 Plug And Play ECU WRXLink (04) - WRX104X

    Easy to install. Affordable. Reliable.  G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  This ECU fits inside the factory OEM enclosure. Installation is a...

    $1,595.00
  • Subaru EJ20 Plug And Play Link ECU - WRXLink (7-9) - WRX9X Subaru EJ20 Plug And Play Link ECU - WRXLink (7-9) - WRX9X Subaru EJ20 Plug And Play Link ECU - WRXLink (7-9) - WRX9X

    Link

    Subaru EJ20 Plug And Play Link ECU - WRXLink (7-9) - WRX9X

    Easy to install. Affordable. Reliable.  G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  This ECU fits inside the factory OEM enclosure. Installation is a...

    $1,595.00
  • Link Three Channel Inductive Igniter -I3

    Link

    Link Three Channel Inductive Igniter -I3

    This three channel igniter is suitable for electronic ignition applications.  Required when using coils that don't have inbuilt igniters.Common uses include: wasted spark on 6 cylinder engines, coil-per-plug setups on 3 cylinder engines or using...

    $145.00
  • Link E-throttle G4 - #G4RET

    Link

    E-throttle G4 - #G4RET

    Link's new G4+ external E-throttle (Drive by Wire) module works with Link's G4+ Storm, Kurofune and PlugIN ECUs to give you full control of your throttle setup, allowing a faster more precise throttle response. Replace your old mechanical throttle...

    $295.00
  • Link E-Throttle Accelerator Pedal Module

    Link

    E-Throttle Accelerator Pedal Module

    E-Throttle Accelerator Pedal Module Firewall mounted hanging design 16degree (~70mm) travel Redundant dual output potentiometers suitable for use with Electronic throttle bodies Includes 6 pin mating connector kit

    $179.00
  • Link Electronic Throttle Body Kit - 82mm

    Link

    Electronic Throttle Body Kit - 82mm

    82mm Electronic Throttle Body 82mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit

    $230.00
  • Link Electronic Throttle Body Kit - 54mm

    Link

    Electronic Throttle Body Kit - 54mm

    54mm Electronic Throttle Body 54mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit

    $230.00
  • AIM GPS-08 Module for AIM Dashes

    Link

    AIM GPS-08 Module for AIM Dashes

    Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.Features: Sample lap and split times as well as speed, position and acceleration - all the information needed for engine tuning as well as for improving your driving technique...

    $278.00
  • Link MXG Strada 7" Dash - Race Edition

    Link

    Link MXG Strada 7" Dash - Race Edition

    Link MXG Strada 7” dash, powered by AIM.The Link MXG Strada Race Edition is a full colour, 7-inch dash display with 10 RGB shift lights and eight customisable alarm LED lights. The dash is pre-configured to work with all Link G4+/G4X Wire-In and...

    $1,399.00
  • Link MXG Strada 7" Dash - Street Edition

    Link

    Link MXG Strada 7" Dash - Street Edition

    Link MXG Strada 7” dash, powered by AIM.The Link MXG Strada Street edition is a full colour, 7-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side of the dash. It is pre-configured to work with all Link...

    $1,399.00
  • Link MXS Strada 5" Dash - Street Edition

    Link

    Link MXS Strada 5" Dash Display - Street Edition

    Link MXS Strada 5” dash, powered by AIM.The Link MXS Strada Street edition is a full colour, 5-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side of the dash. It is pre-configured to work with all...

    $1,129.00
  • Link Boost Control Solenoid - 3 Port

    Link

    Boost Control Solenoid - 3 Port

    More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of boost control applications, they allow for precise control of boost and boost levels can be raised to...

    $125.00
  • Link Boost Control Solenoid - 4 Port

    Link

    Boost Control Solenoid - 4 Port

    Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.4 port Boost control soldenoids are commonly used for big boost applications, boost levels can be raised as...

    $145.00
  • Link Wideband O2 sensor (LSU49)

    Link

    Wideband O2 sensor (LSU49)

    This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes:     Link G4+/G4X Fury and G4+Thunder ECU’s – These have on-board LSU4.9 wide-band control.  Link CAN-Lambda...

    $185.00
  • Link CAN Lambda

    Link

    CAN Lambda

    Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs.  If using the CAN Lambda with a G4+/G4X PlugIn ECU use a Link CANPCB cable to...

    $335.00
  • Link O2 Bung & Plug

    Link

    O2 Bung & Plug

    Used to install LSU 4.9 Wideband O2 sensor. Includes weld on bung and plug.

    $19.00
  • Link Exhaust Gas Temperature Probe

    Link

    Exhaust Gas Temperature Probe

    Extreme Duty Fast Response EGT Temperature Probe  Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel protected wires Designed for extreme engine test & racing...

    $115.00
  • Link 5 Bar MAP Sensor (MAP5)

    Link

    5 Bar MAP Sensor (MAP5)

    The Link 5 Bar MAP sensor reads up to 5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 4.0 Bar (or 58psi) of boost pressure.  Includes Plug and Pins Mount via weld on bund, tapped hole or...

    $265.00
  • Link 6.5 Bar MAP Sensor (MAP6.5)

    Link

    6.5 Bar MAP Sensor (MAP6.5)

    The Link 6.5 Bar MAP sensor reads up to 6.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 5.5 Bar (or 87psi) of boost pressure.  Includes Plug and Pins Mount via weld on bung, tapped hole...

    $275.00
  • Link 4 Bar MAP Sensor (MAP4)

    Link

    4 Bar MAP Sensor (MAP4)

    The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 3.0 Bar (or 44psi) of boost pressure. The wiring pinout for this sensor is marked directly on the sensor...

    $124.00
  • Link 3 Bar MAP Sensor (MAP3)

    Link

    3 Bar MAP Sensor (MAP3)

    This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 Bar (or 29psi) of boost pressure. The wiring pinout for this sensor is indicated on the sensor. Includes...

    $109.00
  • Link 1.15 Bar MAP Sensor (MAP1.15)

    Link

    1.15 Bar MAP Sensor (MAP1.15)

    The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sensor can also be used in applications where positive intake pressures of up to 0.15 Bar (approx 2 PSI) are...

    $99.00
  • Link 2.5 Bar MAP Sensor (MAP2.5)

    Link

    2.5 Bar MAP Sensor (MAP2.5)

    The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 1.5 Bar (approx 22psi) of boost pressure. The wiring pinout for this sensor is marked directly on the...

    $105.00
  • Link CAN to USB Tuning Cable (CUSB)

    Link

    Link CAN to USB Tuning Cable (CUSB)

    Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with: Link G4X Storm  Link G4X and G4+ Fury  Link G4X and G4+ Xtreme Link G4+ Thunder  All Link G4+ and...

    $55.00
  • Link CAN to Serial Plug (CANF)

    Link

    Link CAN to Serial Plug (CANF)

    Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect. 

    $25.00
  • Link CAN to Serial Cable (CANPCB)

    Link

    Link CAN to Serial Cable (CANPCB)

    Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect. 

    $35.00
  • Link CAN to Serial Tuning Cable (CANSER)

    Link

    Link CAN to Serial Tuning Cable (CANSER)

    Link CAN to Serial (DB9 Female connector) Tuning Cable. Used to connect ECU to a computer with a serial interface (DB9 Male). A USB tuning cable is also available. Compatible with: Link G4X Storm  Link G4X and G4+ Fury  Link G4X and G4+...

    $55.00
  • Link USB Mini Cable

    Link

    Link USB Mini Cable

    USB Mini Cable. Used to connect ECU to computer for tuning. Suitable for: G4X Atom G4X Monsoon G4+ Atom G4+ Kurofune G4+ Monsoon

    $25.00
  • Link A Loom Short

    Link

    Link A Loom Short

    0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour...

    $69.00
  • Link B Loom Short

    Link

    Link B Loom Short

    0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour...

    $89.00
  • Link A Loom Long

    Link

    Link A Loom Long

    5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to...

    $169.00
  • Link B Loom Long

    Link

    Link B Loom Long

    5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to...

    $169.00
  • Link Dual Core Cable

    Link

    Dual Core Cable

    Dual core screen cable for use with trigger signals and knock sensors - 10m per pack

    $45.00
  • WRXLink - WRX2X WRXLink - WRX2X

    Link

    WRXLink - WRX2X

    Easy to install. Affordable. Reliable.  G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  This ECU fits inside the factory OEM enclosure. Installation is a...

    $1,095.00
36 of 55 Items