Link Subaru EJ20 Plug And Play Link ECU - WRXLink (7-9) - WRX9X Easy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits... MSRP: Was: Now: $1,845.00
Link Link Three Channel Inductive Igniter -I3 This three channel igniter is suitable for electronic ignition applications. Required when using coils that don't have inbuilt igniters.Common uses include: wasted spark on 6 cylinder engines,... MSRP: Was: Now: $160.00
Link E-throttle G4 - #G4RET Link's new G4+ external E-throttle (Drive by Wire) module works with Link's G4+ Storm, Kurofune and PlugIN ECUs to give you full control of your throttle setup, allowing a faster more precise... MSRP: Was: Now: $340.00
Link E-Throttle Accelerator Pedal Module E-Throttle Accelerator Pedal Module Firewall mounted hanging design 16degree (~70mm) travel Redundant dual output potentiometers suitable for use with Electronic throttle bodies Includes 6 pin... MSRP: Was: Now: $195.00
Link Electronic Throttle Body Kit - 82mm 82mm Electronic Throttle Body 82mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit MSRP: Was: Now: $255.00
Link Electronic Throttle Body Kit - 54mm 54mm Electronic Throttle Body 54mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit MSRP: Was: Now: $255.00
Link Link MXG Strada 7" Dash - Race Edition Link MXG Strada 7” dash, powered by AIM.The Link MXG Strada Race Edition is a full colour, 7-inch dash display with 10 RGB shift lights and eight customisable alarm LED lights. The dash is... MSRP: Was: Now: $1,599.00
Link Link MXG Strada 7" Dash - Street Edition Link MXG Strada 7” dash, powered by AIM.The Link MXG Strada Street edition is a full colour, 7-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side... MSRP: Was: Now: $1,599.00
Link Link MXS Strada 5" Dash Display - Street Edition Link MXS Strada 5” dash, powered by AIM.The Link MXS Strada Street edition is a full colour, 5-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side... MSRP: Was: Now: $1,299.00
Link Boost Control Solenoid - 3 Port More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of boost control applications, they allow for... MSRP: Was: Now: $140.00
Link Boost Control Solenoid - 4 Port Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.4 port Boost control soldenoids are commonly used for... MSRP: Was: Now: $160.00
Link Wideband O2 sensor (LSU49) This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes: Link G4+/G4X Fury and G4+Thunder ECU’s – These have... MSRP: Was: Now: $125.00
Link Link CAN Lambda Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs. If using the CAN Lambda with a... MSRP: Was: Now: $365.00
Link O2 Bung & Plug Used to install LSU 4.9 Wideband O2 sensor. Includes weld on bung and plug. MSRP: Was: Now: $22.00
Link Link Exhaust Gas Temperature Probe Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel... MSRP: Was: Now: $135.00
Link 5 Bar MAP Sensor (MAP5EU) The Link 5 Bar MAP sensor reads up to 5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 4.0 Bar (or 58psi) of boost pressure... MSRP: Was: Now: $200.00
Link 8 Bar MAP Sensor (MAP8EU) The 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 7 Bar (or 101psi) of boost pressure... MSRP: Was: Now: $220.00
Link 4 Bar MAP Sensor (MAP4) The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 3.0 Bar (or 44psi) of boost pressure. The wiring... MSRP: Was: Now: $130.00
Link 3 Bar MAP Sensor (MAP3) This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 Bar (or 29psi) of boost pressure. The wiring pinout... MSRP: Was: Now: $125.00
Link 1.15 Bar MAP Sensor (MAP1.15) The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sensor can also be used in applications where positive... MSRP: Was: Now: $115.00
Link 2.5 Bar MAP Sensor (MAP2.5) The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 1.5 Bar (approx 22psi) of boost pressure. The... MSRP: Was: Now: $120.00
Link Link CAN to USB Tuning Cable (CUSB) Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with: Link G4X Storm Link G4X and G4+ Fury Link G4X... MSRP: Was: Now: $60.00
Link Link CAN to Flying Leads Connector (CANDASH) Link CAN Connector to flying leads. Can be used for custom applications – Please contact our tech support to check compatibility/suitability.
Link Link CAN to Serial Plug (CANF) Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect. MSRP: Was: Now: $28.00
