JEM-Sport JEM-Sport E-Connector and Pin Kit "E" Loom Do you want to pin your own wiring harness into your new Link Standalone ECU? Here is the connector and terminal pin kit for the Link E Loom connection. You may also be interested in our B Loom connector kit, HERE. MSRP: Was: Now: $39.99
Link 10m 4 Core CAN Wiring 10m 4 Core CAN Wiring. Useful for wiring in CAN Accessories. Four internal wires (White, Green, Red, Black) in a PVC outer jacket. Internal Wire Spec: FLRRY 0.5mm² (20 AWG) Outer Jacket Sepc: PVC, OD 6.1mm MSRP: Was: Now: $40.00
Link Automotive Wire Pack 50m (4 Colors) Details 50m pack of Automotive Wire (4 colours). 20m x Red10m x Black10m x Red/Green10m x Green Wire Spec: AVSS Thinwall 0.5mm² (20 AWG) MSRP: Was: Now: $45.00
Link LS Gen 3 to Gen 4 Cam Sensor Conversion Harness Adapter harness to run the Gen 4 front mounted under water pump Cam Sensor on the Gen 3 LS Engine. MSRP: Was: Now: $40.00
Link LS Gen 4 Knock Adapter Loom Intended for use with Link ECU terminated LS engine harness. Plug and play compatibility with Gen 4 Knock Sensors in factory location. MSRP: Was: Now: $60.00
Link LS Gen 3 Knock Adapter Loom • Intended for use with Link ECU terminated LS engine harness. Plug and play compatibility with factory Gen 3 Knock Sensor loom (located in the valley). MSRP: Was: Now: $25.00
Link LS Map Adapter Harness • Intended for use with Link ECU terminated LS engine harness. Plug and play compatibility for Gen 3 LS map sensors MSRP: Was: Now: $25.00
Link LS Drive By Wire Adapter Loom • Intended for use with Link ECU terminated LS engine harness. Plug and play compatibility for Gen 4 LS DBW throttle bodies. • This adapter loom terminates to Aux 9/10, 5v reference, sensor ground, AN5, and AN6 via the pre-wired DBW connector... MSRP: Was: Now: $45.00
JEM-Sport JEM-Sport B-Connector and Pin Kit "B" Loom Do you want to pin your own wiring harness into your new Link Standalone ECU? Here is the connector and terminal pin kit for the Link B Loom connection. You may also be interested in our A Loom connector kit, HERE. MSRP: Was: Now: $39.99
JEM-Sport JEM-Sport A-Connector and Pin Kit "A" Loom Do you want to pin your own wiring harness into your new Link Standalone ECU? Here is the connector and terminal pin kit for the Link A Loom connection. You may also be interested in our B Loom connector kit, HERE. MSRP: Was: Now: $39.99
Link Link CAN to USB Tuning Cable (CUSB) Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with: Link G4X Storm Link G4X and G4+ Fury Link G4X and G4+ Xtreme Link G4+ Thunder All Link G4+ and... MSRP: Was: Now: $60.00
Link Link CAN to Flying Leads Connector (CANDASH) Link CAN Connector to flying leads. Can be used for custom applications – Please contact our tech support to check compatibility/suitability. MSRP: Was: Now: $63.00
Link Link CAN to Serial Plug (CANF) Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect. MSRP: Was: Now: $28.00
Link Link CAN to Serial Cable (CANPCB) Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect. MSRP: Was: Now: $40.00
Link Link CAN to Serial Tuning Cable (CANSER) Link CAN to Serial (DB9 Female connector) Tuning Cable. Used to connect ECU to a computer with a serial interface (DB9 Male). A USB tuning cable is also available. Compatible with: Link G4X Storm Link G4X and G4+ Fury Link G4X and G4+... MSRP: Was: Now: $60.00
Link Link USB Mini Cable USB Mini Cable. Used to connect ECU to computer for tuning. Suitable for: G4X Atom G4X Monsoon G4+ Atom G4+ Kurofune G4+ Monsoon MSRP: Was: Now: $28.00
Link Link A Loom Short 0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour... MSRP: Was: Now: $77.00
Link Link B Loom Short 0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour... MSRP: Was: Now: $77.00
Link Link A Loom Long 5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to... MSRP: Was: Now: $189.00
Link Link B Loom Long 5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to... MSRP: Was: Now: $189.00
Link Dual Core Cable Dual core screen cable for use with trigger signals and knock sensors - 10m per pack MSRP: Was: Now: $50.00
Link Link B Loom Medium 2.5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to... MSRP: Was: Now: $165.00
Link Link A Loom Medium 2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to... MSRP: Was: Now: $165.00
Link Connector and Pin Kit "A" Loom Want to pin your own wiring harness into your new Link Standalone ECU? Here is the connector and terminal pin kit for the Link A Loom connection. MSRP: Was: Now: $42.00
Link Connector and Pin Kit "B" Loom Want to pin your own wiring harness into your new Link Standalone ECU? Here is the connector and terminal pin kit for the Link B Loom connection. MSRP: Was: Now: $42.00
Link Connector and Pin Kit "D" Loom Want to pin your own wiring harness into your new Link Thunder Standalone ECU? Here is the connector and terminal pin kit for the Link D Loom connection. MSRP: Was: Now: $42.00
Link Connector and Pin Kit "C" Loom Want to pin your own wiring harness into your new Link Thunder Standalone ECU? Here is the connector and terminal pin kit for the Link C Loom connection. MSRP: Was: Now: $42.00
