StandAlone ECU - Page 7

ECUMASTER

WHP Wideband Knock Sensor Kit - M8

MSRP:

Was:

Now: $85.00
ECUMASTER

WHP Wideband Knock Sensor Kit - M10

MSRP:

Was:

Now: $85.00
ECUMASTER

WHP Flex Fuel Sensor Kit

MSRP:

Was:

Now: $139.00
ECUMASTER

WHP Boost Control Solenoid Kit- Black Fittings and Bracket

MSRP:

Was:

Now: $126.00
ECUMASTER

WHP Boost Control Solenoid Kit

MSRP:

Was:

Now: $114.00
ECUMASTER

WHP Flex Fuel Sensor Kit, -6 AN Fittings

MSRP:

Was:

Now: $164.00
ECUMASTER

WHP 4 BAR MAP SENSOR, 1/8 NPT

MSRP:

Was:

Now: $135.00
ECUMASTER

WHP 3.5 BAR MAP SENSOR, 1/8 NPT

MSRP:

Was:

Now: $135.00
ECUMASTER

WHP 7 BAR MAP SENSOR, 1/8 NPT - WHP7M

MSRP:

Was:

Now: $135.00
ECUMASTER

WHP 5 BAR MAP SENSOR, 1/8 NPT

MSRP:

Was:

Now: $135.00
ECUMASTER

WHP 7 BAR FUEL OR OIL PRESSURE SENSOR, 1/8 NPT

MSRP:

Was:

Now: $114.00
ECUMASTER

WHP 10 BAR PRESSURE SENSOR, 1/8 NPT

MSRP:

Was:

Now: $114.00
Link

Link Three Channel Inductive Igniter -I3

MSRP:

Was:

Now: $160.00
Link

E-throttle G4 - #G4RET

MSRP:

Was:

Now: $340.00
Link

E-Throttle Accelerator Pedal Module

MSRP:

Was:

Now: $195.00
Link

Electronic Throttle Body Kit - 82mm

MSRP:

Was:

Now: $255.00
Link

Electronic Throttle Body Kit - 54mm

MSRP:

Was:

Now: $255.00
Link

Link MXG Strada 7" Dash - Race Edition

MSRP:

Was:

Now: $1,599.00
Link

Link MXG Strada 7" Dash - Street Edition

MSRP:

Was:

Now: $1,599.00
Link

Link MXS Strada 5" Dash Display - Street Edition

MSRP:

Was:

Now: $1,299.00
Link

Boost Control Solenoid - 3 Port

MSRP:

Was:

Now: $140.00
Link

Boost Control Solenoid - 4 Port

MSRP:

Was:

Now: $160.00
Link

Wideband O2 sensor (LSU49)

MSRP:

Was:

Now: $125.00
Link

Link CAN Lambda

MSRP:

Was:

Now: $365.00
Link

O2 Bung & Plug

MSRP:

Was:

Now: $22.00
Link

Exhaust Gas Temperature Probe

MSRP:

Was:

Now: $135.00
Link

5 Bar MAP Sensor (MAP5EU)

MSRP:

Was:

Now: $200.00
Link

8 Bar MAP Sensor (MAP8EU)

MSRP:

Was:

Now: $220.00
Link

4 Bar MAP Sensor (MAP4)

MSRP:

Was:

Now: $130.00
Link

3 Bar MAP Sensor (MAP3)

MSRP:

Was:

Now: $125.00
Link

1.15 Bar MAP Sensor (MAP1.15)

MSRP:

Was:

Now: $115.00
Link

2.5 Bar MAP Sensor (MAP2.5)

MSRP:

Was:

Now: $120.00
Link

Link CAN to USB Tuning Cable (CUSB)

MSRP:

Was:

Now: $60.00
Link

Link CAN to Flying Leads Connector (CANDASH)
Link

Link CAN to Serial Plug (CANF)

MSRP:

Was:

Now: $28.00
Link

Link CAN to Serial Cable (CANPCB)

MSRP:

Was:

Now: $42.00

ECUMASTER

WHP Wideband Knock Sensor Kit - M8

WHP wideband knock sensor kits are designed to take advantage of the sophisticated knock detection circuits in many modern ECUs, such as the ECUMaster EMU. The knock processing chip in the EMU is designed to take advantage of wideband, or flat response,...

MSRP:

Was:

Now: $85.00
ECUMASTER

WHP Wideband Knock Sensor Kit - M10

WHP wideband knock sensor kits are designed to take advantage of the sophisticated knock detection circuits in many modern ECUs, such as the ECUMaster EMU. The knock processing chip in the EMU is designed to take advantage of wideband, or flat response,...

MSRP:

Was:

Now: $85.00
ECUMASTER

WHP Flex Fuel Sensor Kit

WHP Flex Fuel Sensor Kits are designed for use with aftermarket ECUs capable of reading an ethanol content sensor. The use of a WHP Flex Fuel Sensor with the ECUMaster EMU allows for blending of fuel, ignition, engine start, and boost control tables. WHP...

MSRP:

Was:

Now: $139.00
ECUMASTER

WHP Boost Control Solenoid Kit- Black Fittings and Bracket

WHP boost control solenoid kits can be used with either the EMU, EMU Classic, or EMU Black standalone engine control unit or the DET3 piggyback engine control unit. This kit differs from our standard unit in that it comes with a black powdercoated...

MSRP:

Was:

Now: $126.00
ECUMASTER

WHP Boost Control Solenoid Kit

WHP boost control solenoid kits can be used with either the EMU standalone engine control unit or the DET3 piggyback engine control unit. WHP boost control solenoid kits are based around a genuine MAC valve built to custom WHP specifications for use in...

MSRP:

Was:

Now: $114.00
ECUMASTER

WHP Flex Fuel Sensor Kit, -6 AN Fittings

WHP Flex Fuel Sensor Kits are designed for use with aftermarket ECUs capable of reading an ethanol content sensor. The use of a WHP Flex Fuel Sensor with the ECUMaster EMU allows for blending of fuel, ignition, engine start, and boost control...

MSRP:

Was:

Now: $164.00
ECUMASTER

WHP 4 BAR MAP SENSOR, 1/8 NPT

WHP 4 BAR MAP SENSORS are ideally suited for high boost MAP sensor applications, providing resolution up to nearly 45 PSI of boost pressure. WHP pressure sensors are the perfect companion to any ECU. WHP sensors are built to custom specifications in an...

MSRP:

Was:

Now: $135.00
ECUMASTER

WHP 3.5 BAR MAP SENSOR, 1/8 NPT

WHP 3.5 BAR MAP SENSORS are ideally suited for high boost MAP sensor applications, providing resolution up to 35 PSI of boost pressure. WHP pressure sensors are the perfect companion to any ECU. WHP sensors are built to custom specifications in an...

MSRP:

Was:

Now: $135.00
ECUMASTER

WHP 7 BAR MAP SENSOR, 1/8 NPT - WHP7M

WHP 7 BAR MAP SENSORS are ideally suited for high boost MAP sensor applications or exhaust manifold absolute pressure measurement, providing resolution up to 87 PSI of boost pressure (approx. 100 PSI absolute). WHP pressure sensors are the perfect...

MSRP:

Was:

Now: $135.00
ECUMASTER

WHP 5 BAR MAP SENSOR, 1/8 NPT

WHP 5 BAR MAP SENSORS are ideally suited for high boost MAP sensor applications, providing resolution up to approximately 58 PSI of boost pressure. WHP pressure sensors are the perfect companion to any ECU. WHP sensors are built to custom specifications...

MSRP:

Was:

Now: $135.00
ECUMASTER

WHP 7 BAR FUEL OR OIL PRESSURE SENSOR, 1/8 NPT

WHP 7 BAR PRESSURE SENSORS are ideally suited for automotive applications such as oil and fuel pressure. 7 bar sensors are generally used for fuel pressure, and 10 bar sensors are recommended for oil pressure as cold oil pressure can easily exceed 7 bar...

MSRP:

Was:

Now: $114.00
ECUMASTER

WHP 10 BAR PRESSURE SENSOR, 1/8 NPT

WHP 10 BAR PRESSURE SENSORS are ideally suited for automotive applications such as oil and fuel pressure. 7 bar sensors are generally used for fuel pressure, and 10 bar sensors are recommended for oil pressure as cold oil pressure can easily exceed 7 bar...

MSRP:

Was:

Now: $114.00
Link

Link Three Channel Inductive Igniter -I3

This three channel igniter is suitable for electronic ignition applications. Required when using coils that don't have inbuilt igniters.Common uses include: wasted spark on 6 cylinder engines, coil-per-plug setups on 3 cylinder engines or using...

MSRP:

Was:

Now: $160.00
Link

E-throttle G4 - #G4RET

Link's new G4+ external E-throttle (Drive by Wire) module works with Link's G4+ Storm, Kurofune and PlugIN ECUs to give you full control of your throttle setup, allowing a faster more precise throttle response. Replace your old mechanical throttle...

MSRP:

Was:

Now: $340.00
Link

E-Throttle Accelerator Pedal Module

E-Throttle Accelerator Pedal Module Firewall mounted hanging design 16degree (~70mm) travel Redundant dual output potentiometers suitable for use with Electronic throttle bodies Includes 6 pin mating connector kit

MSRP:

Was:

Now: $195.00
Link

Electronic Throttle Body Kit - 82mm

82mm Electronic Throttle Body 82mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit

MSRP:

Was:

Now: $255.00
Link

Electronic Throttle Body Kit - 54mm

54mm Electronic Throttle Body 54mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit

MSRP:

Was:

Now: $255.00
Link

Link MXG Strada 7" Dash - Race Edition

Link MXG Strada 7” dash, powered by AIM.The Link MXG Strada Race Edition is a full colour, 7-inch dash display with 10 RGB shift lights and eight customisable alarm LED lights. The dash is pre-configured to work with all Link G4+/G4X Wire-In and...

MSRP:

Was:

Now: $1,599.00
Link

Link MXG Strada 7" Dash - Street Edition

Link MXG Strada 7” dash, powered by AIM.The Link MXG Strada Street edition is a full colour, 7-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side of the dash. It is pre-configured to work with all Link...

MSRP:

Was:

Now: $1,599.00
Link

Link MXS Strada 5" Dash Display - Street Edition

Link MXS Strada 5” dash, powered by AIM.The Link MXS Strada Street edition is a full colour, 5-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side of the dash. It is pre-configured to work with all...

MSRP:

Was:

Now: $1,299.00
Link

Boost Control Solenoid - 3 Port

More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of boost control applications, they allow for precise control of boost and boost levels can be raised to...

MSRP:

Was:

Now: $140.00
Link

Boost Control Solenoid - 4 Port

Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.4 port Boost control soldenoids are commonly used for big boost applications, boost levels can be raised as...

MSRP:

Was:

Now: $160.00
Link

Wideband O2 sensor (LSU49)

This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes: Link G4+/G4X Fury and G4+Thunder ECU’s – These have on-board LSU4.9 wide-band control. Link CAN-Lambda...

MSRP:

Was:

Now: $125.00
Link

Link CAN Lambda

Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs. If using the CAN Lambda with a G4+/G4X PlugIn ECU use a Link CANPCB cable to...

MSRP:

Was:

Now: $365.00
Link

O2 Bung & Plug

Used to install LSU 4.9 Wideband O2 sensor. Includes weld on bung and plug.

MSRP:

Was:

Now: $22.00
Link

Exhaust Gas Temperature Probe

Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel protected wires Designed for extreme engine test & racing...

MSRP:

Was:

Now: $135.00
Link

5 Bar MAP Sensor (MAP5EU)

The Link 5 Bar MAP sensor reads up to 5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 4.0 Bar (or 58psi) of boost pressure. Includes Plug and Pins Mount via weld on bund, tapped hole or...

MSRP:

Was:

Now: $200.00
Link

8 Bar MAP Sensor (MAP8EU)

The 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 7 Bar (or 101psi) of boost pressure. Includes Plug and Pins Push wire through connector;...

MSRP:

Was:

Now: $220.00
Link

4 Bar MAP Sensor (MAP4)

The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 3.0 Bar (or 44psi) of boost pressure. The wiring pinout for this sensor is marked directly on the sensor...

MSRP:

Was:

Now: $130.00
Link

3 Bar MAP Sensor (MAP3)

This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 Bar (or 29psi) of boost pressure. The wiring pinout for this sensor is indicated on the sensor. Includes...

MSRP:

Was:

Now: $125.00
Link

1.15 Bar MAP Sensor (MAP1.15)

The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sensor can also be used in applications where positive intake pressures of up to 0.15 Bar (approx 2 PSI) are...

MSRP:

Was:

Now: $115.00
Link

2.5 Bar MAP Sensor (MAP2.5)

The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 1.5 Bar (approx 22psi) of boost pressure. The wiring pinout for this sensor is marked directly on the...

MSRP:

Was:

Now: $120.00
Link

Link CAN to USB Tuning Cable (CUSB)

Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with: Link G4X Storm Link G4X and G4+ Fury Link G4X and G4+ Xtreme Link G4+ Thunder All Link G4+ and...

MSRP:

Was:

Now: $60.00
Link

Link CAN to Flying Leads Connector (CANDASH)

Link CAN Connector to flying leads. Can be used for custom applications – Please contact our tech support to check compatibility/suitability.
Link

Link CAN to Serial Plug (CANF)

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect.

MSRP:

Was:

Now: $28.00
Link

Link CAN to Serial Cable (CANPCB)

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect.

MSRP:

Was:

Now: $42.00