ECUMASTER WHP Wideband Oxygen Sensor Kit- Bosch 4.9 with connector and terminals MSRP: Was: Now: $119.00
ECUMASTER 4-Position CAN Keyboard CAN Keyboards offer drivers control of key ECU and PMU functions. Designed to withstand the harshest conditions, ECUMaster CAN Keyboards are completely immune to water, mud, and fuel. It is worth mentioning that CAN keyboards offer a massive... MSRP: Was: Now: $349.00
ECUMASTER 6-Position CAN Keyboard CAN Keyboards offer drivers control of key ECU and PMU functions. Designed to withstand the harshest conditions, ECUMaster CAN Keyboards are completely immune to water, mud, and fuel. It is worth mentioning that CAN keyboards offer a massive... MSRP: Was: Now: $359.00
ECUMASTER 8-Position CAN Keyboard CAN Keyboards offer drivers control of key ECU and PMU functions. Designed to withstand the harshest conditions, ECUMaster CAN Keyboards are completely immune to water, mud, and fuel. It is worth mentioning that CAN keyboards offer a massive... MSRP: Was: Now: $369.00
ECUMASTER 12-Position CAN Keyboard CAN Keyboards offer drivers control of key ECU and PMU functions. Designed to withstand the harshest conditions, ECUMaster CAN Keyboards are completely immune to water, mud, and fuel. It is worth mentioning that CAN keyboards offer a massive... MSRP: Was: Now: $399.00
ECUMASTER Infrared CAN Brake Disc Temperature Camera ECUMaster CAN infrared brake disc temperature cameras are a valuable addition to any racing program. Each camera provides temperature readings for 16 points across the brake disc, and transmits this information over CAN Bus. The ADU dash display can... MSRP: Was: Now: $429.00
ECUMASTER WHP Air Temperature Sensor Kit, 1/8" Compact This kit includes a 1/8" compact Air Temp Sensor, aluminum weld bung, connector, terminals and seals. WHP Air Temperature Sensor Kits are perfect for vehicles using the EMU standalone that are not equipped from the factory with an intake air temperature... MSRP: Was: Now: $65.00
ECUMASTER 1/8 NPT EGT Bung 1/8 NPT Weld-on stainless steel bung for K-Type thermocouples. MSRP: Was: Now: $6.00
ECUMASTER Connector and Terminals for Bosch 4.9 Wideband Oxygen Sensor WHPWB493 is a connector, terminals, and wire seals for a Bosch 4.9 Wideband Oxygen Sensor. A 4.9 sensor may only be used with the EMU Black (EMU Black may be used with either a 4.2 or 4.9 sensor. EMU Classic may only be used with a 4.2 sensor) MSRP: Was: Now: $8.00
ECUMASTER 3/8 Quick Release to -6 AN Male Adapter Adapter for quick release 3/8 fuel fittings to -6 AN male, Black. Note: these are sold individually and not as pairs. MSRP: Was: Now: $9.00
ECUMASTER 8 Position Rotary Switch 8 Position Rotary Switches can be used to control various ECU functions such as Traction Control and Boost Control settings. Installation is simple, just connect 5V supply, sensor ground, and the output signal. Rotary switches can be connected to any... MSRP: Was: Now: $39.00
ECUMASTER WHP IGN-1A Ignition Coil IGN-1A ignition coils are well known for their incredible spark energy and often cost less than other lesser commonly used ignition coils. This smart coil is capable of being driven by a 5V signal, which means no external ignitor is needed. These coils... MSRP: Was: Now: $75.00
ECUMASTER Infrared CAN Tire Temperature Camera ECUMaster CAN infrared tire temperature cameras are a valuable addition to any racing program. Each camera provides temperature readings for 16 points across the tire, and transmits this information over CAN Bus. The ADU dash display can display a... MSRP: Was: Now: $429.00
ECUMASTER Lambda to CAN Please consider this alternative, they work in exaclty the same way for significantly less cost, and we have plenty in stock: https://jem-sport.com/aem-x-series-inline-wideband-uego-afr-controller/ LAMBDA to CAN Ecumaster Lambda to CAN... MSRP: Was: Now: $249.00
ECUMASTER WHP EGT Probe- Type K Thermocouple WHP EGT Sensors allow you to use the EGT inputs on the EMU and EMU Black to measure exhaust gas temperature. WHP Sensors are a stainless body Type K thermocouple and come with a male 1/8 NPT compression fitting and a female 1/8 NPT weld fitting. These... MSRP: Was: Now: $65.00
ECUMASTER ECUMaster Fluid Temperature Sensor (oil, water, etc.), 1/8 NPT ECUMaster Oil Temperature Sensor Kits are perfect for customers using the ECUMaster EMU standalone that would like to monitor oil temperature or fluid temperature. The ECUMaster Oil Temperature Sensor kit can also be used with the DET3. ECUMaster Oil... MSRP: Was: Now: $45.00
ECUMASTER WHP Wideband Oxygen Sensor Kit- Bosch 4.9 with connector and terminals WHP Wideband Oxygen Sensor Kits allow you to use the on-board wideband oxygen sensor controller in the ECUMaster EMU Black. Accurate information is vital to engine performance and tuning, and the Bosch LSU 4.9 wideband oxygen sensor is a reliable and... MSRP: Was: Now: $119.00
ECUMASTER WHP Wideband Oxygen Sensor Kit- Bosch 4.9 with harness WHP Wideband Oxygen Sensor Kits allow you to use the on-board wideband oxygen sensor controller in the ECUMaster EMU Black. Accurate information is vital to engine performance and tuning, and the Bosch LSU 4.9 wideband oxygen sensor is a reliable and... MSRP: Was: Now: $139.00
ECUMASTER WHP Air Temperature Sensor Kit, 3/8 NPT WHP Air Temperature Sensor Kits are perfect for vehicles using the EMU standalone that are not equipped from the factory with an intake air temperature sensor or have removed the factory MAF and need an air temperature sensor to replace the one built... MSRP: Was: Now: $49.00
ECUMASTER WHP Wideband Knock Sensor Kit - M12 WHP wideband knock sensor kits are designed to take advantage of the sophisticated knock detection circuits in many modern ECUs, such as the ECUMaster EMU. The knock processing chip in the EMU is designed to take advantage of wideband, or flat response,... MSRP: Was: Now: $85.00
ECUMASTER WHP Wideband Knock Sensor Kit - M8 WHP wideband knock sensor kits are designed to take advantage of the sophisticated knock detection circuits in many modern ECUs, such as the ECUMaster EMU. The knock processing chip in the EMU is designed to take advantage of wideband, or flat response,... MSRP: Was: Now: $85.00
ECUMASTER WHP Wideband Knock Sensor Kit - M10 WHP wideband knock sensor kits are designed to take advantage of the sophisticated knock detection circuits in many modern ECUs, such as the ECUMaster EMU. The knock processing chip in the EMU is designed to take advantage of wideband, or flat response,... MSRP: Was: Now: $85.00
ECUMASTER WHP Flex Fuel Sensor Kit WHP Flex Fuel Sensor Kits are designed for use with aftermarket ECUs capable of reading an ethanol content sensor. The use of a WHP Flex Fuel Sensor with the ECUMaster EMU allows for blending of fuel, ignition, engine start, and boost control tables. WHP... MSRP: Was: Now: $139.00
ECUMASTER WHP Boost Control Solenoid Kit- Black Fittings and Bracket WHP boost control solenoid kits can be used with either the EMU, EMU Classic, or EMU Black standalone engine control unit or the DET3 piggyback engine control unit. This kit differs from our standard unit in that it comes with a black powdercoated... MSRP: Was: Now: $126.00
ECUMASTER WHP Boost Control Solenoid Kit WHP boost control solenoid kits can be used with either the EMU standalone engine control unit or the DET3 piggyback engine control unit. WHP boost control solenoid kits are based around a genuine MAC valve built to custom WHP specifications for use in... MSRP: Was: Now: $114.00
ECUMASTER WHP Flex Fuel Sensor Kit, -6 AN Fittings WHP Flex Fuel Sensor Kits are designed for use with aftermarket ECUs capable of reading an ethanol content sensor. The use of a WHP Flex Fuel Sensor with the ECUMaster EMU allows for blending of fuel, ignition, engine start, and boost control... MSRP: Was: Now: $164.00
ECUMASTER WHP 4 BAR MAP SENSOR, 1/8 NPT WHP 4 BAR MAP SENSORS are ideally suited for high boost MAP sensor applications, providing resolution up to nearly 45 PSI of boost pressure. WHP pressure sensors are the perfect companion to any ECU. WHP sensors are built to custom specifications in an... MSRP: Was: Now: $135.00
ECUMASTER WHP 3.5 BAR MAP SENSOR, 1/8 NPT WHP 3.5 BAR MAP SENSORS are ideally suited for high boost MAP sensor applications, providing resolution up to 35 PSI of boost pressure. WHP pressure sensors are the perfect companion to any ECU. WHP sensors are built to custom specifications in an... MSRP: Was: Now: $135.00
ECUMASTER WHP 7 BAR MAP SENSOR, 1/8 NPT - WHP7M WHP 7 BAR MAP SENSORS are ideally suited for high boost MAP sensor applications or exhaust manifold absolute pressure measurement, providing resolution up to 87 PSI of boost pressure (approx. 100 PSI absolute). WHP pressure sensors are the perfect... MSRP: Was: Now: $135.00
ECUMASTER WHP 5 BAR MAP SENSOR, 1/8 NPT WHP 5 BAR MAP SENSORS are ideally suited for high boost MAP sensor applications, providing resolution up to approximately 58 PSI of boost pressure. WHP pressure sensors are the perfect companion to any ECU. WHP sensors are built to custom specifications... MSRP: Was: Now: $135.00
ECUMASTER WHP 7 BAR FUEL OR OIL PRESSURE SENSOR, 1/8 NPT WHP 7 BAR PRESSURE SENSORS are ideally suited for automotive applications such as oil and fuel pressure. 7 bar sensors are generally used for fuel pressure, and 10 bar sensors are recommended for oil pressure as cold oil pressure can easily exceed 7 bar... MSRP: Was: Now: $114.00
ECUMASTER WHP 10 BAR PRESSURE SENSOR, 1/8 NPT WHP 10 BAR PRESSURE SENSORS are ideally suited for automotive applications such as oil and fuel pressure. 7 bar sensors are generally used for fuel pressure, and 10 bar sensors are recommended for oil pressure as cold oil pressure can easily exceed 7 bar... MSRP: Was: Now: $114.00
Link Link Three Channel Inductive Igniter -I3 This three channel igniter is suitable for electronic ignition applications. Required when using coils that don't have inbuilt igniters.Common uses include: wasted spark on 6 cylinder engines, coil-per-plug setups on 3 cylinder engines or using... MSRP: Was: Now: $160.00
Link E-throttle G4 - #G4RET Link's new G4+ external E-throttle (Drive by Wire) module works with Link's G4+ Storm, Kurofune and PlugIN ECUs to give you full control of your throttle setup, allowing a faster more precise throttle response. Replace your old mechanical throttle... MSRP: Was: Now: $325.00
Link E-Throttle Accelerator Pedal Module E-Throttle Accelerator Pedal Module Firewall mounted hanging design 16degree (~70mm) travel Redundant dual output potentiometers suitable for use with Electronic throttle bodies Includes 6 pin mating connector kit MSRP: Was: Now: $195.00
Link Electronic Throttle Body Kit - 82mm 82mm Electronic Throttle Body 82mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit MSRP: Was: Now: $255.00