Link Electronic Throttle Body Kit - 54mm 54mm Electronic Throttle Body 54mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit MSRP: Was: Now: $255.00
Link Boost Control Solenoid - 3 Port More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of boost control applications, they allow for precise control of boost and boost levels can be raised to... MSRP: Was: Now: $140.00
Link Boost Control Solenoid - 4 Port Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.4 port Boost control soldenoids are commonly used for big boost applications, boost levels can be raised as... MSRP: Was: Now: $160.00
Link Wideband O2 sensor (LSU49) This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes: Link G4+/G4X Fury and G4+Thunder ECU’s – These have on-board LSU4.9 wide-band control. Link CAN-Lambda... MSRP: Was: Now: $205.00
Link Link CAN Lambda Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs. If using the CAN Lambda with a G4+/G4X PlugIn ECU use a Link CANPCB cable to... MSRP: Was: Now: $365.00
Link O2 Bung & Plug Used to install LSU 4.9 Wideband O2 sensor. Includes weld on bung and plug. MSRP: Was: Now: $21.00
Link Exhaust Gas Temperature Probe Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel protected wires Designed for extreme engine test & racing... MSRP: Was: Now: $129.00
Link 5 Bar MAP Sensor (MAP5EU) The Link 5 Bar MAP sensor reads up to 5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 4.0 Bar (or 58psi) of boost pressure. Includes Plug and Pins Mount via weld on bund, tapped hole or... MSRP: Was: Now: $200.00
Link 8 Bar MAP Sensor (MAP8EU) The 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 7 Bar (or 101psi) of boost pressure. Includes Plug and Pins Push wire through connector;... MSRP: Was: Now: $220.00
Link 4 Bar MAP Sensor (MAP4) The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 3.0 Bar (or 44psi) of boost pressure. The wiring pinout for this sensor is marked directly on the sensor... MSRP: Was: Now: $125.00
Link 3 Bar MAP Sensor (MAP3) This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 Bar (or 29psi) of boost pressure. The wiring pinout for this sensor is indicated on the sensor. Includes... MSRP: Was: Now: $120.00
Link 1.15 Bar MAP Sensor (MAP1.15) The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sensor can also be used in applications where positive intake pressures of up to 0.15 Bar (approx 2 PSI) are... MSRP: Was: Now: $110.00
Link 2.5 Bar MAP Sensor (MAP2.5) The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 1.5 Bar (approx 22psi) of boost pressure. The wiring pinout for this sensor is marked directly on the... MSRP: Was: Now: $115.00
Link Link CAN to USB Tuning Cable (CUSB) Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with: Link G4X Storm Link G4X and G4+ Fury Link G4X and G4+ Xtreme Link G4+ Thunder All Link G4+ and... MSRP: Was: Now: $60.00
Link Link CAN to Flying Leads Connector (CANDASH) Link CAN Connector to flying leads. Can be used for custom applications – Please contact our tech support to check compatibility/suitability. MSRP: Was: Now: $63.00
Link Link CAN to Serial Plug (CANF) Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect. MSRP: Was: Now: $28.00
Link Link CAN to Serial Cable (CANPCB) Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect. MSRP: Was: Now: $40.00
Link Link CAN to Serial Tuning Cable (CANSER) Link CAN to Serial (DB9 Female connector) Tuning Cable. Used to connect ECU to a computer with a serial interface (DB9 Male). A USB tuning cable is also available. Compatible with: Link G4X Storm Link G4X and G4+ Fury Link G4X and G4+... MSRP: Was: Now: $60.00
Link Link USB Mini Cable USB Mini Cable. Used to connect ECU to computer for tuning. Suitable for: G4X Atom G4X Monsoon G4+ Atom G4+ Kurofune G4+ Monsoon MSRP: Was: Now: $28.00
Link Link A Loom Short 0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour... MSRP: Was: Now: $77.00
Link Link B Loom Short 0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour... MSRP: Was: Now: $77.00
Link Link A Loom Long 5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to... MSRP: Was: Now: $189.00
Link Link B Loom Long 5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to... MSRP: Was: Now: $189.00
Link Dual Core Cable Dual core screen cable for use with trigger signals and knock sensors - 10m per pack MSRP: Was: Now: $50.00
MoTeC MoTeC Lambda to CAN (LTC) These are on a decent backorder! Please consider this alternative, they work in exactly the same way for significantly less cost, and we have plenty in stock: https://jem-sport... MSRP: Was: Now: $465.00
MoTeC MoTeC Lambda to CAN (LTC-NTK) These are on a decent backorder! Please consider this alternative, they work in exaclty the same way for significantly less cost, and we have plenty in stock: https://jem-sport... MSRP: Was: Now: $465.00
MoTeC MoTeC Lambda to CAN (LTCD) These are on a decent backorder! Please consider this alternative, they work in exaclty the same way for significantly less cost, and we have plenty in stock: https://jem-sport... MSRP: Was: Now: $695.00
MoTeC MoTeC Lambda to CAN (LTCD-NTK) These are on a decent backorder! Please consider this alternative, they work in exaclty the same way for significantly less cost, and we have plenty in stock: https://jem-sport... MSRP: Was: Now: $695.00
MoTeC MoTeC UTC USB to CAN Adapter MOTEC UTCUSB to CAN adapter (includes USB cable) Software Requirements for UTC CompatibilityM400, M600, M800, M880 - V2.30S or laterM84PDM16, PDM32, PDM15, PDM30 - V1.0 or laterBR2 - V1.0.6.2 (this software ships with all data logging... MSRP: Was: Now: $295.00
MoTeC MoTeC 5 Button Rotary Keypad The MoTeC 5-Button Rotary CAN keypad is a fully customized keypad designed specifically for your vehicle. Each button features a custom graphic or symbol, which represents the function it controls. It will enhance the application and integration of... MSRP: Was: Now: $595.00
MoTeC MoTeC 8 Position CAN Keyboard The RaceGrade Motorsport Keypad is a fully customized keypad designed specifically for your vehicle. Each button features a custom graphic or symbol, which represents the function it controls. It will enhance the application and... MSRP: Was: Now: $574.00
MoTeC MoTeC 15 Position CAN Keyboard Available with optional label sheets! The RaceGrade Motorsport Keypad is a fully customized keypad designed specifically for your vehicle. Each button features a custom graphic or symbol, which represents the function it controls. It will... MSRP: Was: Now: $589.00
MoTeC PDM15 / PDM30 10' Unterminated Harness PDM15/PDM30 FLYING LEAD HARNESS, UNTERMINATED, THIS IS MADE WITH TEFZEL WIRE MSRP: Was: Now: $720.00
MoTeC Traction Control Multiplexer (TCMUX) The Traction Control Multiplexer (TCMux) is designed to increase the speed inputs into a MoTeCECU.It takes four individual wheel speed signals and turns them into one coded signal for an ECU to read as driven speed (wheels that have power),... MSRP: Was: Now: $413.00
MoTeC Standard Knock Module MoTeC’s Standalone Knock Module (SKM) provides individual cylinder closed loop knock control allowing tuners to safely optimise high performance ignition maps. The module is compatible with all 'hundred series' ECUs. The SKM is housed... MSRP: Was: Now: $1,036.00
MoTeC Ignition Expander Module (IEX) The Ignition Expander module (IEX) is designed to increase the ignition output capacity of MoTeC ECUs. The IEX connects to a single ignition output on the ECU and can drive up to 8 ignition modules. For 10 and 12 coil applications, two IEX... MSRP: Was: Now: $345.00